how to hook up bush hog to kubota tractor

Bush hogging is an essential task in maintaining farmland, homestead, or garden. The process of bush hogging involves attaching a bush hog to a tractor to cut trees, bushes, or shrubs. A bush hog is a heavy-duty rotary mower with sharp blades that spin at a high speed to cut through thick vegetation. In this article, we will guide you through the process of how to hook up a bush hog to a Kubota tractor.

Gather The Required Materials

Before hooking up a bush hog to a Kubota tractor, you need to gather the necessary materials. Essentially, you need the following: a 3-point hitch system, a PTO shaft, clevis pins, safety pins, and a drawbar. The 3-point hitch system helps to attach the bush hog to the tractor while the PTO shaft transfers power from the tractor engine to the bush hog blades. The clevis pins and safety pins connect the hitch system to the tractor while the drawbar attaches the hitch to the bush hog.

Attach The 3-Point Hitch System

The first step in hooking up a bush hog to a Kubota tractor is to attach the 3-point hitch system. The 3-point hitch system always comes with the bush hog, and it has two upper lift arms and a lower center link. Begin by inserting the lift arms into the tractor's hitch. Lift the center link of the hitch using a hydraulic system or a jack, and slide the hitch's pin into the tractor's lower center link. Attach a safety pin on each side of the hitch's pin to prevent it from slipping.

Connect The PTO Shaft

The second step is to connect the PTO shaft. The PTO shaft transfers the power from the tractor engine to the bush hog blades. Begin by pointing the PTO shaft on the bush hog towards the tractor. Push it until it locks in place with the PTO shaft on the tractor. Attach the safety chain to the shaft's protective cover and secure the chain to the tractor's PTO guard.

Attach The Drawbar And Safety Pins

The third step in hooking up a bush hog to a Kubota tractor is to attach the drawbar and safety pins. The drawbar attaches the hitch to the bush hog. Begin by lining up the holes on the drawbar and hitch. Insert the clevis pins into the hitch and then slide the pins through the holes on the drawbar. Secure the pins with the safety pins to ensure they do not dislodge during operation.

Conclusion

In conclusion, hooking up a bush hog to a Kubota tractor requires a 3-point hitch system, a PTO shaft, clevis pins, safety pins, and a drawbar. The process involves attaching the hitch system to the tractor, connecting the PTO shaft, attaching the drawbar and safety pins, and then ensuring everything is secure. It is essential to follow the above steps to ensure safe operation during use. Always remember to read the manufacturer's manual for both the tractor and bush hog to ensure correct installation and maintenance of the equipment.