how to start a ferguson tractor

Starting a Ferguson tractor can be a daunting task for those who are unfamiliar with the process. However, with the right tools and knowledge, starting a Ferguson tractor can be a fairly simple task. In this article, we will guide you on how to start a Ferguson tractor.

Gather the necessary equipment

Before starting your Ferguson tractor, it is important to gather all the necessary equipment. Make sure that you have the key to the tractor and that the battery is properly charged. You will also need a sturdy pair of boots, a clean rag, and a wrench to make any necessary adjustments.

Check the oil and fuel

Before you start the Ferguson tractor, it is important to check the oil and fuel levels. Check the oil level using the dipstick to make sure that it is at the correct level. If the oil level is low, add more oil. Next, check the fuel level and ensure that there is enough fuel in the tank.

Prepare the tractor for starting

Once you have gathered the necessary equipment and checked the oil and fuel levels, it is time to prepare the tractor for starting. Push the clutch pedal to the floor and engage the PTO lever. Turn the key to the “on” position and let the light on the dash go out. Then, pull out the choke and push the throttle lever all the way up. Finally, turn the key to the “start” position.

Start the tractor

Now that you have prepared the tractor for starting, it is time to actually start the tractor. Press the clutch pedal to the floor and turn the key to the “start” position. The engine should begin to turn over, and once it starts, release the key and push the choke back in. Push the throttle lever back down to normal operating speed.

Conclusion

Starting a Ferguson tractor can be simple and straightforward if you have the right tools and knowledge. By following the steps outlined in this article, you should be able to start your Ferguson tractor with ease. Remember to check the oil and fuel levels, prepare the tractor for starting, and then start the tractor. With a little practice, you will be able to start your Ferguson tractor like a pro.