The Field Marshall tractor was a popular agricultural machine in the United Kingdom during the early to mid-20th century. These robust and dependable tractors were designed to withstand tough working conditions and deliver optimal performance. Starting a Field Marshall tractor can be a daunting task for a beginner, but with the right approach and know-how, it can be done effortlessly. In this article, we'll discuss how to get your Field Marshall tractor up and running without any hiccups.
Preparing to Start your Field Marshall Tractor
Before attempting to start your Field Marshall tractor, it's essential to carry out some essential checks to ensure that everything is in order. First and foremost, check the oil level in your engine. Make sure the oil level is not too high or too low, and top it up if necessary.
Next, ensure that the fuel tank is filled with diesel. You should also check the fuel filter and ensure it's clean. If it's dirty, replace it before starting the engine.
Finally, check the battery for signs of corrosion or a low level of charge. Clean any corrosion on the battery terminals and ensure the battery has a full charge.
Starting your Field Marshall Tractor
Once you've carried out all the necessary checks, it's time to start the engine. Follow the steps outlined below carefully:
1. Engage the handbrake and put the gear lever in the neutral position.
2. Ensure that the starter button is in the 'off' position, and the throttle is set to the minimum level.
3. Turn the ignition key to the right until you hear the engine start to turn. Release the key once the engine has started.
4. Once the engine has started, you can adjust the throttle to increase the engine speed gradually. Avoid revving the engine too hard, especially when it's cold.
Operating your Field Marshall Tractor
Once your Field Marshall tractor is running smoothly, it's time to operate it carefully. You should always keep your eyes on the terrain you're traversing and your hands on the steering wheel.
The brake pedals control the brakes on your Field Marshall tractor. The right pedal controls the brakes on the right wheels, and the left pedal controls the brakes on the left wheels. To stop the tractor entirely, press both pedals simultaneously.
The gears on your Field Marshall tractor are arranged like those on a car. First gear is found farthest from the driver, while the reverse gear is closest to the driver. Change gears smoothly and avoid forcing the selector lever between gears.
In Conclusion
Starting and operating your Field Marshall tractor requires some knowledge and skill, but it's not overly complicated. By following the steps outlined in this article, you should be able to operate your Field Marshall tractor confidently and safely. Remember that safety should always come first when operating any machinery, so take your time and keep a sharp eye on your surroundings. Good luck, and happy farming!