Removing a bush hog from your John Deere tractor may seem like a daunting task, but with the right tools and a little bit of knowledge, it can be done quickly and easily. This article will guide you through the step-by-step process of removing your bush hog, allowing you to focus on other important tasks.
Tools needed
Before you begin, gather the necessary tools. You will need a socket wrench, a pair of pliers, a hammer, and safety gloves. It's important to wear safety gloves throughout the process to protect your hands from any sharp edges or potential hazards.
Step-by-step process
1. First, make sure the bush hog is securely attached to the tractor. Check that all pins and bolts are in place and tightened properly.
2. Disconnect the PTO shaft from the bush hog. Use your socket wrench to loosen the bolt located at the connection point.
3. Remove the safety chains from the bush hog's hitch pins, allowing the top link of the tractor to freely move.
4. Lower the bush hog to the ground by releasing the hydraulic lever or detaching the hydraulic hose. Be cautious, as the bush hog may be heavy and difficult to maneuver.
5. Once the bush hog is on the ground, use your pliers to remove the cottar pins on the hitch pins. Then, use your hammer to remove the hitch pins completely.
6. Gently back the tractor away from the bush hog and carefully drive it to a safe location where you can store the bush hog.
7. Once the bush hog is removed, inspect it for any signs of wear and tear. If necessary, make any repairs before reinstalling it onto your tractor.
Cleaning and storage
After the bush hog has been removed, it's important to properly clean and store it. Use a pressure washer or hose to clean off any debris, mud, or dirt that has accumulated on it during use.
Allow the bush hog to dry completely before storing it in a dry, covered area. Be sure to keep it off the ground to prevent any moisture from seeping into it. This will help extend the life of your bush hog and ensure it is ready for use the next time you need it.
Conclusion
Removing a bush hog from your John Deere tractor can be a simple process if you have the right tools and follow the correct steps. By properly removing and storing your bush hog, you can ensure it continues to function properly and lasts for many years to come.