how to mount a tractor tire

Mounting a tractor tire can be a daunting task, especially if you've never done it before. However, with the right tools and techniques, it can be a relatively easy procedure. In this guide, we will take you through the steps of how to mount a tractor tire from start to finish, so you know how to do it properly and safely.

Preparation

Before starting, you need to make sure you have all the necessary tools and equipment. You will need a good quality tire changer, an air compressor, tire lubricant, tire gauge, wrenches, and a pry bar. Also, make sure you have a clean, flat, and stable work area. Park your tractor on level ground and ensure the handbrake is engaged.

Removing the Old Tire

The first step is to remove the old tire from the rim. Use a tire iron to loosen the lug nuts and remove the wheel from the tractor. Once the wheel is removed, deflate the tire completely by removing the valve stem. Next, use the pry bar to remove the tire from the rim. Be careful not to damage the rim or tire during this process, and use tire lubricant to help loosen the tire from the rim if necessary.

Mounting the New Tire

After removing the old tire, it's time to mount the new tire on the rim. Mount one side of the tire onto the rim by using your hands to push the bead over the rim flange. Once the tire is seated on the rim, use the tire changer to mount the other side of the tire onto the rim. Make sure you wear eye and ear protection during this step, and follow the manufacturer's instructions for your tire changer.

Inflating the Tire

Once the tire is mounted, it's time to inflate it. Before inflating, make sure the tire bead is properly seated on the rim. Use a tire gauge to check the recommended tire pressure, and inflate the tire accordingly using an air compressor. Check the tire pressure again once it's inflated and adjust if necessary.

Conclusion

Mounting a tractor tire can seem intimidating, but it's a task that can be accomplished with the right tools and techniques. Follow these steps carefully, and always ensure that you have the proper safety equipment on hand. By taking the time to do it properly, you can rest assured that your tractor is safe and ready to get back to work.